Guide On How To Clean A Refrigerator Drain Pan

Modern refrigerators have inconspicuous drain pan. They are used to collect the excess water or oil expelled by the machine. If you are using a self-defrosting fridge, your appliance should have a drain pan to collect water.

If there is moisture, there is also an increase in bacteria and molds. Moreover, mosquitoes tend to lay eggs in clear water. If you don’t want the drain pain to be the breeding ground of numerous creatures, you would want to clean it regularly.

Step 1: Unplug your fridge first to avoid mishaps. You might want to set a day of the month for refrigerator maintenance and cleaning. This way, you can concentrate on cleaning the interior and exterior of the machine. This will save you a lot of time and trouble. Wipe excess water on the floor refrigerator repair pasadena.

Step 2: Check the manual of your refrigerator and find the pan. This is usually installed at the bottom part of the machine. The pain is usually concealed by a front panel. Try to remove the front panel at the bottom of the machine. This might look like the platform of the fridge.

Step 3: Get towels and an empty bucket. Also wear rubber gloves to protect your hands. Carefully remove the pain. Place the towels around the perimeter of the appliance. Gradually pour the contents of the pan in the empty bucket.

Step 4: Wash the drain pan. Use soapy water and get rid of dirt and oil. If there are hard minerals or molds, try to treat them with vinegar. Mix one part vinegar and one part water. Soak the affected areas with this mixture and allow the solution to dissolve minerals and molds. Vinegar also works in loosening up crusty debris. You can also add baking soda to vinegar mixture as this can further clean the pan.

Step 5: Get soft-bristled brush to slough off oil or dirt residues. Rinse it in flowing water. Make sure it is clean before installing it back in the refrigerator.

Step 6: Get clean towel and wipe the excess moisture from the pan. Make sure you dry it up before placing it back in the fridge.

Step 7: Place the pan back in the fridge and put the cover back on. Make sure you wipe excess water on the floor.

Step 8: Plug the washer.

Do this method at least once a month to ensure that bacteria will not grow inside your refrigerator.

Leave a Reply